|
6 3/4" replacement brush
|
6" replacement brush.
|
6" soft replacement brush
|
7 1/2" replacement brush
|
|
8 1/2" tall replacement brush
|
9" extra tall replacement brush
|
Band-Circles the assembled tear drop plates
|
|
|
1HP blender with 48oz polycarbonate cup. Hi.Low, On/Off togle switches. 1yr wty
|
2HP blender with 64oz Polycarbonate cup, 4 pre set times, self compensating motor
|
|
BLADE - Stainless Steel for BLE-100 (includes nut)
|
|
BLADE ASSEMBLY - Stainless Steel for BLE-100 (includes nut, holder, ball bearing and silicone seal)
|
BRUSH - (Special) 5" x 11" Chute Brush, White
|
BRUSH - Baby Bottle
|
BRUSH - Beaker 1000ml
|
|
BRUSH - Beaker 100ml
|
BRUSH - Beaker 50ml
|
BRUSH - Coffee Pot & Pitcher (narrow top)
|
BRUSH - Coffee Pot (wide top)
|
|
BRUSH - Flask 500ml
|
BRUSH - Flask Washer 125ml
|
BRUSH - Milk Bottle - Gallon
|
BRUSH - Milk Bottle - Quart
|
|
BRUSH - PILSNER Brewtus
|
BRUSH - Replacement for Manual Glass Washers
|
BRUSH - Twisted Wire Tube (JUMBO FLASK)
|
BRUSH - Twisted Wire, Tube Brush 1/2" x 3"
|
|
BRUSH - Twisted Wire, Tube Brush 1/4" x 3"
|
BRUSH - Twisted Wire, Tube Brush 3/8" x 3"
|
BRUSH - Twisted Wire, Tube Brush 5/8" x 3 1/2"
|
Brush Pins-Locking pin for all Bar Maid brushes.
|
|
CLUTCH - for BLE-100
|
CLUTCH ASSEMBLY - for BLE-200
|
Coffee Pot Brush-shaped for cleaning glass coffee urns.
|
CONTAINER - Polycarbonate 48oz for BLE-100 (includes blade assembly, collar, and lid)
|
|
CONTAINER - Polycarbonate 64oz for BLE-200 (includes blade assembly and lid)
|
CONTAINER - Stainless Steel 32oz for BLE-100 (includes blade assembly, collar, and lid)
|
Cord Assembly-With switch and GFCI
|
Motor Coupling
|
|
Feet Set-4 black rubber feet with 4 screws
|
Foot Pedel Switch
|
GEAR BEARINGĀ - Bronze gear bearings for all Bar Maid glass washers.
|
|
|
GEARS - Set includes 5 #9 Drive and 1 #10 Idler gear
|
GEAR - White short gear for Bar Maid only.
|
GEAR - White notched gear for use on all Bar Maid glass washers.
|
Ground Fault Plug-User attachable
|
|
Lower dirve shaft bearing
|